推拉篷篷布折疊打包的步驟有哪些?
1、篷布正面向上平展鋪開,留出兩根邊繩,將長度方向的兩側邊折向篷布縱向中線。
1. Spread the tarpaulin flat upwards, leaving two edge ropes, and fold the two sides of the length direction towards the longitudinal centerline of the tarpaulin.
2、將已折好的兩側各分三等份,向著中線連折兩次。
2. Divide the folded sides into three equal parts and fold them twice towards the center line.

3、將篷布寬度方向的兩側邊各向篷布橫向中線折,然后再各自連續向中間對折三次而后跳踏實。折疊后的外形尺寸約為1000mmx600mmx300mm。
3. Fold the two sides of the tarpaulin in the width direction towards the horizontal centerline of the tarpaulin, and then fold them continuously towards the middle three times before jumping firmly. The folded dimensions are approximately 1000mmx600mmx300mm.
4、用預留繩打捆,兩面捆十字,勒緊捆牢,繩頭塞好,不應松動和繩扣脫落,不得拖拉。
4. Use reserved rope to tie, cross tie on both sides, tighten and tie firmly, plug the rope head tightly, do not loosen or the rope buckle should fall off, and do not drag.
5、折疊后應完整清楚地露出篷布上的小路徽及篷布編號。
5. After folding, the small path emblem and tarpaulin number on the tarpaulin should be fully and clearly exposed.
以上的精彩內容來自:濟南遮陽棚更多精彩內容請點擊我們的網站查看更多:http://www.jinyangyinwu.com
The above exciting content comes from: Jinan Sunshade. For more exciting content, please click on our website to view more: http://www.jinyangyinwu.com
閱讀/ Recommended reading
- 影響濟南膜結構車棚成本的因素 2026-05-22
- 伸縮式遮陽棚功能應用介紹 2026-05-20
- 濟南推拉蓬的搭建和拆卸過程復雜嗎? 2026-05-18
- 遮陽棚:守護夏日清涼的城市風景線 2026-05-14
1、使用的清洗劑來對膜結構停車棚進行定期清洗,從技術的角度來看,膜結構不需要清晰,不過為了延長器使用壽命,就必須要定期的進行清洗。1. Use professional cle...

